Aqualeak systems are designed to handle a wide range of commercial applications. Call us at 1-800-318-4159 to order or to discuss how Aqualeak can be tailored to meet your business or municipal needs.
For our full lineup of sensor-based commercial leak detection equipment, see our water leak detection system category page.
Waterbug PDF information sheet available: Water Leak Alarm
- Single zone water leak detection system, designed for commercial properties where high value equipment, information, or materials are present
- Can work with a variety of sensor types, including water sensing cables and probes
- Can be connected to a BMS and a solenoid valve to switch off the water supply
- Monitors for water leaks and outputs an audio visual alarm and/or alerts a BMS
Models and Pricing:
- Waterbug+Plus: $455.00 (WB110VAV)
- Standard Waterbug: $383.00 (WB24V)
The Waterbug single zone water leak detection system is designed to detect the ingress of water in sensitive areas where high value equipment, information, or materials are present. Waterbug is capable of working with a variety of detection devices, including sensor cables and probes.
When it detects the presence of water, the Waterbug will go into "alarm" status. There are 2 versions of the Waterbug: the standard Waterbug and the Waterbug+Plus. The standard Waterbug is a blind box with no local alarm outputs. It connects via a volt-free relay to the BMS. When a leak is detected, the relay changes over and the BMS will be alerted to the situation. The Waterbug+Plus has the same functionality as the standard Waterbug with the addition of a local audio and visual output on the alarm panel.
Typical Waterbug applications include archive rooms, communications rooms, computer rooms, electrical switch rooms, boiler houses, plant rooms, small data centers, and coffee/break rooms.
The Waterbug can use up to 2 sensors wired in parallel attached, allowing more than one area to be monitored simultaneously.
- Dimensions: 127x75x45mm
- Power Supply: 240VAC (optional 12 – 24vDC & 110VAC)
- Power Usage: 50mA
- Output Signal: No-volt relay
- Relay Rating: 240V AC 2 amp
The Waterbug and the multi-zone GWD Water Leak Detector, can both use the same variety of sensors. The most common are listed below. See the sensors’ individual product pages for more information.
|Water Sensing Cable: SC||Water Point Sensor with box and bracket: ESDUS|
Shipping: Shipping charges apply. Call for specific shipping costs for your location.
To see other leak detection devices available, use the product navigation links on the top left of this page or go to our Aqualeak product category page. In addition to water leak systems, we also carry oil leak detection systems, like the single zone Oilbug or the RGO Multi-Zone Oil Leak Detection system. There are also a range of additional niche products in the Aqualeak product line, besides the items shown on our site - call us for further information.